Non-yellowing water based wipe on sealer dries to a matte finish. For best results apply with a damp applicator sponge. Apply 2 coats 2-4 hours apart. Not recommended over dark colors due to haziness of water based coatings.
Be sure to gently mix your Tough Coat™ prior to using it as the matting agent and other ingredients may settle to the bottom.
Do not shake vigorously as this will cause air bubbles in your piece that are difficult to remove once applied.
Do not use on medium to darker colours as it will show streaks, this is water vapour trapped within the tough coat and is visible on dark colours in particular. Should streaking occur, you can simply apply the paint over top and leave it as is.
This is known as the “Tough Coat Sandwhich”. It has Paint first, then Tough Coat, then Paint and it is beyond durable! This is only recommend for very high traffic surfaces.
Use the All in one Finishing Oil as a substitute to avoid streaking and to provide an extra durable strong top coat over Fusion Mineral Paint over high traffic areas like kitchen cabinets or table tops, even flooring!