Tough Coat™ Matte Poly
Perfect for those high traffic surfaces such as table tops, our non-yellowing water-based wipe on sealer, easily applied with a damp lint free cloth and dries to a matte finish.
Shake gently before use. If applying to a recently painted surface, allow 12-24 hours of drying time before applying. For best results, use with a damp lint free rag and apply two coats 2-4 hours apart. In humid areas, longer drying times may be required.
Good to know: 500ml covers about 75 sq.ft (7m2). Always test your methods and process to ensure best results. Clean up is easy with soap and warm water.
Tip: Be sure to gently mix your Tough Coat™ prior to using it as the matting agent and
other ingredients may settle to the bottom. Do not shake vigorously as this
will cause air bubbles in your piece that are difficult to remove once applied.
For more inspiration and to learn more about our wonderful products please visit www.fusionmineralpaint.com